|16x32 RGB LED Matrix Panel|
|5V 2A Power Supply|
|Female/Female Jumper Wires|
|Male/Male Jumper Wires|
|2.1mm to Screw Jack Adapter|
To connect up and use this display, you will need the following items.
If you don't mind cutting the connector off one end of the power cable for the display, and then stripping two of the wires, then you can do without the male to male headers.
This guide was first published on Mar 13, 2014. It was last updated on Mar 13, 2014.
This page (You Will Need) was last updated on Aug 14, 2020.