- Apply Sugru, double-sided tape or super glue to one side of the LiPo battery.
- Place the battery on the bottom of the enclosure apply pressure to mount in place.
- Connect two M3 screws from the ends of the base stick to the M3 sides of the offset sticks.
- Screw in two more M3 screws from the bottom of the base stick.
- Twist on the stand offs to these screws.
- Screw on the M4 screws to the enclosure base.
- Screw on the M2.5 screws through the LiPo charger unit and onto the base stick.
- Plug the battery into the
"BATT"
JST connector on the LiPo charger.
Page last edited March 08, 2024
Text editor powered by tinymce.