The holder for this prints in one piece and lets you connect everything with M2.5 machine screws.

Print this out in a filament of your choice. It will need some supports.

First, add the arcade buttons (using the hole at the back to slot the cables up).

Now you can bolt everything together with M2.5 machine screws. It should end up looking like this:

The NeoPixel stick is the one thing that doesn't bolt into place. You can secure this using a dab of hot glue or other similar adhesive.

You coffee camera is now complete. Gift one to a friend and you can share your coffee photos with each other.

If you want to take things further, you could analyse your Adafruit.io feed to see who makes the best coffee (or at least, who gets the most likes from the other user), or adapt this camera for another purpose (perhaps letting a child send selfies to their grandparents).