Battery Box

Insert three AAA alkaline batteries in the battery box as shown.

JST Plug

Close the battery pack's cover, then plug the battery box JST plug into the Clue's JST battery connector.

Adhesive

Cut an Uglu adhesive square in half, then peel and stick the halves to the battery box as shown. Avoid sticking the pads to the battery box slide cover.

Then, peel off the protective paper and press the clue to the pads to stick.

Power On

Flip on the power switch on the battery box.

Boot

The Cluetooth Scanner will boot up. 

On the next page, you'll learn how to operate it.