3D Printed Parts
STL files for 3D printing are oriented to print "as-is" on FDM style machines. Original design source may be downloaded using the links below.
- ClueSlim-Pad.stl
- ClueSlim-Top.stl
- ClueSlim-Case-back.stl
Slicing Parts
Slice with setting for PLA material.
The parts were sliced using CURA using the slice settings below.
PLA filament 200c extruder
0.2 layer height
4% gyroid infill
60mm/s print speed
60c heated bed
4% gyroid infill for translucent filament to maximize see through
Assemble
The CLUE board sits over the lip inside the ClueSlim-Case-back.
ClueSlim-Top fits over the display with the A and B buttons passing through the cutouts.
ClueSlim-Pad part has two tabs that slide into the slots in the ClueSlim-Top part.
The teeth shapes on ClueSlim-Case-back and ClueSlim-Pad press fit together to protect the Edge Connector.
