Timer operation in default mode

Here's how you use the shot timer in default mode. To start the timer, press the button on the right side of the screen. After the delay time has been reached, the timer beeps, signaling that the timer has been started.

To review the shot times, press the B button. The screen will show the shots in a list. The first entry on each line is the shot number, the second is the shot time, and the third is the difference between that shot and the previous one. To scroll through this page press the A or B button. To return to the timer screen hold either the A or B button for 1 second.

Timer operation in personal best mode

Personal best mode works exactly the same as default mode except that when the timer starts, the main timer text turns green. It stays green and updates after every shot until the latest shot detected is above the set time, at which point it turns red.

Timer operation in par mode

Par mode works by starting the timer at the first beep and then beeping again once the set time has been reached.

Menu mode

To enter menu mode, hold down Button A for 1 second. To scroll through the options, tap Button A. To select an option, tap Button B. To go to the previous menu layer, hold Button A for 1 second. To exit the menu, hold Button A for 1 second on the upper menu layer.

Configuring delay

Configuring sensitivity