sensors_clue-sensor-plotter-pads-logo-2400x1800.jpg
Adafruit CLUE running sensor plotter showing analogue voltages on the three pads.

This project demonstrates plotting the CLUE's wide variety of onboard sensors and the analogue input pads in CircuitPython 5 and above using the displayio library.

A similar plotting program in C/Arduino from the Adafruit examples is shown alongside the CircuitPython one.

Note: the Design, Testing and Number Representation sections are rather detailed and primarily intended for students.

Parts

Adafruit CLUE - nRF52840 Express with Bluetooth LE

PRODUCT ID: 4500
Do you feel like you just don't have a CLUE? Well, we can help with that - get a CLUE here at Adafruit by picking up this sensor-packed development board. We wanted to build some...

USB cable - USB A to Micro-B

PRODUCT ID: 592
This here is your standard A to micro-B USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your Metro, Feather, Raspberry Pi or other dev-board or...
This guide was first published on Apr 01, 2020. It was last updated on Apr 01, 2020.
This page (Overview) was last updated on Oct 21, 2020.