Animated GIF showing CLUE board  displaying data from the many on-board sensors.
Do you feel like you just don't have a CLUE? Well, we can help with that - get a CLUE here at Adafruit by picking up this sensor-packed development board. We wanted to build some...
$44.95
In Stock
Angled shot of a Strain Gauge Load Cell - 4 Wires - 1Kg.
A strain gauge is a type of electronic sensor used to measure force or strain (big surprise there). They are made of an insulating flexible backing with a metallic...
$3.95
In Stock
Video of a pair of white hand's trying to bend a strain gauge. The gauge is connected to a breakout board which is also connected to an OLED display on a half-size breadboard. The numbers on the OLED display show high digit numbers.
If you are feeling the stress and strain of modern life a Wheatstone bridge and you want to quantify it, this handy breakout will do the job, no sweat! The Adafruit...
$5.95
In Stock
Angled shot of JST SH 4-Pin Cable - 200mm Long.
This 4-wire cable is a little over 200mm / 7.8" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm pitch instead of...
Out of Stock
Angled shot of a Clear Acrylic Enclosure + Hardware Kit for Adafruit CLUE.
Here is a chic minimalist enclosure for your CLUE board! This case has been laser-cut specifically to accommodate the TFT display, tactile buttons, and...
$4.95
In Stock
USB cable - USB A to Micro-B - 3 foot long
This here is your standard A to micro-B USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your Metro, Feather, Raspberry Pi or other dev-board or...
$2.95
In Stock
Top view of a clear plastic storage box opened up with several compartments of variously sized wire ferrules.
Crimping's not just for 80s hair metal bands! When your project requires repeated insertion and removal with minimal strain, why not check out the reliable wire...
$17.95
In Stock
Cross-Plate for 2020 Aluminum Extrusion
Attach various pieces of 20mm slotted aluminum extrusion together with this 7-hole cross joining plate.Measures 100mm long x 60mm wide, 4mm thick. 5.3m drill holes 20mm...
$4.95
In Stock
Coupling Plate with 3 Holes for  Aluminum Extrusion
Attach various pieces of 20mm slotted aluminum extrusion together with this 3-hole plate.Measures 60mm long, 18mm wide, 4mm thick. 5.3m drill holes 20mm apart so you can...
$1.95
In Stock
Aluminum Extrusion Corner Brace Support
Brace yourself! You'll definitely want to pick up a couple of these corner brace supports when working on a project with 20x20 extrusion. They're nice and solid, made of cast...
$0.95
In Stock
Front angled shot of 3 x AAA battery holder with on-off switch and 2-pin JST PH connector.
This battery holder connects 3 AAA batteries together in series for powering all kinds of projects. We spec'd these out because the box is slim, and 3 AAA's add up to about...
Out of Stock
 6 pack of Clear Adhesive Squares
UGlu Dashes are perfect for a variety of small projects. These adhesive squares provide a stronger bond to most surfaces and are cleaner and easier to...
$0.95
In Stock