Need some motivation before that big meeting or interview? Do you wish you had the right phrase to motivate your friends and colleagues? The Clue And MagTag Pep Talk Generator will provide you with just the right words (or not) to provide sentiment for the occasion.

In this guide, you'll learn how to use a MagTag or a CLUE, or both if you're feeling daring, to create a pep talk generator that will randomly create a motivational sentence using 4 phrases.  

There are instructions in this guide for both the MagTag and the Clue. You can use either. The MagTag will give you a new pep talk every minute and the Clue will give you one when you turn it on and one when you press one of the buttons on the front.

MagTag Parts

MagTag dev board with enclosure pieces, four magnet feet, and lipoly battery
The Adafruit MagTag combines the new ESP32-S2 wireless module and a 2.9" grayscale E-Ink display to make a low-power IoT display that can show data on its screen...
Out of Stock

Or, buy the parts you need separately:

Angled shot of Adafruit MagTag development board with ESP32-S2 and E-Ink display.
The Adafruit MagTag combines the new ESP32-S2 wireless module and a 2.9" grayscale E-Ink display to make a low-power IoT display that can show data on its screen even when power...
Out of Stock
Lithium Ion Polymer Battery 3.7v 420mAh with JST 2-PH connector and short cable
Lithium-ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light, and powerful. The output ranges from 4.2V when completely charged to 3.7V. This...
$6.95
In Stock

Don't forget to pick up a USB-C cable:

USB Type A to Type C Cable - approx 1 meter / 3 ft long
As technology changes and adapts, so does Adafruit. This  USB Type A to Type C cable will help you with the transition to USB C, even if you're still...
$4.95
In Stock

CLUE Parts

Animated GIF showing CLUE board  displaying data from the many on-board sensors.
Do you feel like you just don't have a CLUE? Well, we can help with that - get a CLUE here at Adafruit by picking up this sensor-packed development board. We wanted to build some...
Out of Stock
Angled shot of a Clear Acrylic Enclosure + Hardware Kit for Adafruit CLUE.
Here is a chic minimalist enclosure for your CLUE board! This case has been laser-cut specifically to accommodate the TFT display, tactile buttons, and...
$4.95
In Stock
USB cable - USB A to Micro-B - 3 foot long
This here is your standard A to micro-B USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your Metro, Feather, Raspberry Pi or other dev-board or...
$2.95
In Stock

This guide was first published on Nov 02, 2021. It was last updated on Oct 27, 2021.

This page (Overview) was last updated on Oct 27, 2021.

Text editor powered by tinymce.