Hardware

Parts Required

Easy! You only need two parts - a Feather Huzzah and an OLED FeatherWing

Your purchases from the Adafruit shop help support us writing up these awesome guides, libraries and CircuitPython development and are appreciated!!!

Adafruit Feather HUZZAH with ESP8266

PRODUCT ID: 2821
Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller...
$16.95
IN STOCK

FeatherWing OLED - 128x32 OLED Add-on For All Feather Boards

PRODUCT ID: 2900
A Feather board without ambition is a Feather board without FeatherWings! This is the FeatherWing OLED: it adds a 128x32 monochrome OLED plus 3 user buttons to...
$14.95
IN STOCK

If you happen to be an AdaBox subscriber (what? you should be!) You can find these parts in your Adabox 003 kit!

AdaBox003 – The World of IoT – Curated by Digi-Key

PRODUCT ID: 3268
AdaBox003 – The World of IoT (Curated by Digi-Key) is the perfect gift for folks who are just getting started in the world of DIY electronics. It's an...
$79.95
IN STOCK

Assembly

While I started on a breadboard, I ended up making a cute little sandwich without socket headers at all by connecting the OLED directly to the Feather HUZZAH

If you press the OLED headers against a table you can use a little solder to wick into each hole and have a perfectly flat bottom side. That will keep it from scratching your desk!

Last updated on 2017-12-30 at 11.58.53 PM Published on 2017-12-30 at 11.54.58 PM