3D Printing

The parts for this project are designed to be 3D printed with FDM based machines. STL files are oriented to print "as is". Parts require tight tolerances that might need adjustment of slice settings. Reference the suggested settings below.

CAD Files

The parts can further be separated into small pieces for fitting on printers with smaller build volumes. Note: a STEP file is included for other 3D surface modeling programs such as Onshape, Solidworks and Rhino.

Settings

Use these settings as reference. Values listed were used in Cura slicing software.

0.2mm Layer Height / 0.4mm nozzle
0.4mm Line Width (inner & outer widths)
50mm/s printing speed
10% infill
Supports: No
Skirt: 3

This guide was first published on Nov 05, 2019. It was last updated on Nov 05, 2019.
This page (3D Printing) was last updated on Jun 29, 2020.