CircuitPython Libraries on Linux and Raspberry Pi CircuitPython & OrangePi

CircuitPython Libraries on Linux and Raspberry Pi

Make hardware and interface with sensors super easy using CircuitPython libraries

Image for user MakerMelissa
by M. LeBlanc-Williams and Eva Herrada
published June 30, 2018, last edited July 07, 2026
last major update July 05, 2023
posted in Sensors Raspberry Pi CircuitPython
Save Link Note Download
290
Intermediate
Skill guide

CircuitPython & OrangePi

Page last edited December 23, 2024

Text editor powered by tinymce.

 More To Come! FAQ & Troubleshooting 
Related Guides
A Raspberry Pi with a connected BrainCraft HAT display shows terminal commands. An Ethernet cable and USB devices are plugged into the board. A finger pushes a button on-board triggering more output on the display.
Using Google Assistant on the BrainCraft HAT or...
By M. LeBlanc-Williams
intermediate
37
A small black Adafruit PCA9546 I2C multiplexer breakout board with five STEMMA QT I2C connectors and a black integrated circuit. Gold I2C and power connections are on one side and 4 mounting holes in the corners.
Adafruit PCA9546 4-Channel STEMMA QT Multiplexer
By Liz Clark
beginner
11
Round pendant with a glowing eye symbol in the center, surrounded by intricate patterns. Attached to a beaded blue and silver necklace.
Gemma M0 Sheikah Pendant
By Ruiz Brothers
intermediate
50
A hand hovers near a pumpkin with electronic components, including two eyes/nose/mouth and a ultrasonic sensor embedded in the surface.
Jack-o-Theremin
By Sophy Wong
beginner
11
A blue Adafruit INA260 power sensor board with white labeled pins is shown alongside a pin header and a terminal block connector.
Adafruit INA260 Current + Voltage + Power Sensor...
By Bryan Siepert
beginner
32
A PyBadge displays a "Hello My Name Is Blinka" message on its screen. It features buttons, LEDs, and a connected pink USB cable.
PyBadge Conference Badge With Unicode Fonts
By M. LeBlanc-Williams
beginner
19
A thermocouple amplifier with a long wire is connected to a blue terminal block on a small circuit board with pin headers.
Adafruit MAX31856 Universal Thermocouple Amplifier
By lady ada
intermediate
31
Small 3D-printed black-framed cube lamp with colorful translucent side panels showing geometric heart and arrow designs, lit in pink, yellow, and blue. IR remote and braided USB power cable visible beside the lamp on a pink surface, potted plant in background.
LED Shoji Lamp
By Ruiz Brothers
intermediate
2
A hand holds a CLUE microcontroller board with a display showing altitude readings of 5436 and 5172. Snowy mountains are visible in the background.
CLUE Altimeter
By Carter Nelson
beginner
17
Blue File Glider logo featuring a stylized white sugar glider with the word "GLIDER" across its body. The glider's arms and tail are extended.
File Glider
By Trevor Beaton
beginner
8
Demo of the finished MatrixPortal S3 message board scrolling a blinka image and the text "Hello CircuitPython" across it.
MatrixPortal CircuitPython Animated Message Board
By M. LeBlanc-Williams
intermediate
56
Black ADS7128 ADC and GPIO expander breakout board with labeled through-holes (VIN, GND, SCL, SDA, ADDR, ALRT, AVDD, GND) and two STEMMA QT I2C JST connectors.
Adafruit ADS7128 8-Channel ADC and GPIO Expander
By Liz Clark
beginner
1
New
A hand spins a fidget spinner with an LED ring, displaying a glowing orange light. The spinner is set against a blue background. and has a 3D printed case.
NeoPixel Rotary Fidget
By Ruiz Brothers
intermediate
86
A MagTag e-ink display shows the word "CLEAN" in bold letters, indicating a dishwasher has completed.
MagTag Dishwasher Status
By Carter Nelson
beginner
63
MagTag e-ink display shows details of the next SpaceX launch, Mission CRS-21, scheduled for December 5, 2020, at 11:39 am. Four buttons are visible below the screen.
SpaceX Next Launch Display with Adafruit MagTag
By Anne Barela
beginner
35
Search

Search

Categories