Motor SubAssembly

Ensure the timing belt is tight. Proceed to tighten all of the screws in the motor assembly. 

Bearing SubAssembly

Hold the entire assembly while tightening all of the screws in the bearing assembly.

Tripod Mount SubAssembly

Slide the tripod mount so it's in the center of the sliding rail. Then, proceed to tighten all of the screws.

This guide was first published on Dec 18, 2019. It was last updated on Dec 18, 2019.

This page (Final Assembly) was last updated on Nov 04, 2020.

Text editor powered by tinymce.