3D Printed Parts
The parts for this project are designed to be 3D printed with FDM based machines. STL files are oriented to print "as is". Parts require tight tolerances that might need adjustments to the slice settings. Reference the suggested settings below. Parts do not require any support material.
CAD Files
The parts can further be separated into small pieces for fitting on printers with smaller build volumes. Note: a STEP file is included for other 3D surface modeling programs such as Solidworks, Maya and Rhino.
Slice Parts
The parts were printed and tested in PLA filament. For parts with more strength or usage outdoors we suggest using PETG filament. The parts were sliced using Ultimaker CURA 4.x software on a Creatly CR-10S 3D printer.
Parts List
List of all the 3d printed parts with filenames. Note the slider-rail-mount need to be printed twice.
- slider-featherwing-case.stl
- slider-featherwing-case-bottom.stl
- slider-bat-mount.stl
- slider-bearing-cap.stl
- slider-bar-mount-motor.stl
- slider-bar-mount-bearing.stl
- slider-tripod-mount.stl
- slider-cam-mount.stl
- 2x slider-rail-mount.stl
- 2x slider-feet.stl
- slider-bearing-mount.stl
- slider-motor-mount.stl
- slider-motor-support.stl
- slider-bearing-support.stl
Design Source Files
The project assembly was designed in Fusion 360. This can be downloaded in different formats like STEP, SAT and more. Electronic components like Adafruit's board, displays, connectors and more can be downloaded from our Adafruit CAD parts GitHub Repo.
Text editor powered by tinymce.
