The MIDI to CV Skull may be assembled with 3D printed plates, described below. The top of the case can utilize a color swap to make the skull art pop. The pieces could also be milled or laser cut from other materials, such as wood or acrylic.

The STL files can be downloaded directly here or from Thingiverse.

The skull art is achieved with different depths in the .STL file that can be accentuated by using a color swap at the 1mm height of the model in your slicer software.

The top and bottom plate have mounting holes for the 1/4 size perma proto and the DAC STEMMA board. Stand-offs are used to create a circuit sandwich.

This guide was first published on Aug 02, 2022. It was last updated on 2022-08-02 16:56:26 -0400.

This page (3D Printing) was last updated on Aug 05, 2022.

Text editor powered by tinymce.