All right, now that all that annoying install stuff is done, let's have some fun.

The following sections will provide some basic examples for the main use cases - GPIO, ADC, PWM, I2C, SPI, and NeoPixel.

Make sure you've set the BLINKA_U2IF environment variable.

Installing Libraries for Breakouts

The general process for installing the CircuitPython library you are interested in will be the same as shown in the Python section of the Learn guide for your sensor. Just use pip3.

This guide was first published on May 01, 2021. It was last updated on Mar 08, 2024.

This page (Examples) was last updated on Mar 08, 2024.

Text editor powered by tinymce.