The Adafruit_CircuitPython_Display_Text library allows you to easily add text to your displayio based CircuitPython projects. If you have no prior experience with displayio, you should check out the Displayio Basics Guide first to learn the basic concepts.

This guide will show you how to install the library and go over all of the features and what they do.


Here are some displays that work well with CircuitPython and the displayio library:

PyPortal, our easy-to-use IoT device that allows you to create all the things for the “Internet of Things” in minutes. Make custom touch screen interface...
In Stock
The Adafruit MagTag combines the new ESP32-S2 wireless module and a 2.9" grayscale E-Ink display to make a low-power IoT display that can show data on its screen even when power...
In Stock
Is this not the cutest little display for the Raspberry Pi? It features a 2.8" display with 320x240 16-bit color pixels and a resistive touch overlay. The plate uses the high...
Out of Stock
Spice up your Feather project with a beautiful 3.5" touchscreen display shield with built in microSD card socket. This TFT display is 3.5" diagonal with a bright 6 white-LED...
Out of Stock
A Feather board without ambition is a Feather board without FeatherWings! Spice up your Feather project with a beautiful 2.4" touchscreen display shield with built in microSD card...
Out of Stock

This guide was first published on Mar 09, 2021. It was last updated on 2021-12-06 17:27:00 -0500.

This page (Overview) was last updated on May 20, 2022.

Text editor powered by tinymce.