24
Intermediate
Project guide
Parts
The Adafruit Feather nRF52840 Express is the new Feather family member with Bluetooth® Low Energy and...
$24.95 each
In Stock
Solenoids are basically electromagnets: they are made of a coil of copper wire with an armature (a slug of metal) in the...
$4.95 each
In Stock
When you need to switch a lot of power, N-channel MOSFETs are best for the job. These FETs can switch over 60A and 30V and...
Out of Stock
ΩMG! You're not going to be able to resist these handy resistor packs! Well, axially, they do all of the...
$0.75 each
In Stock
This here is a 10 pack of the classic 1N4001 power blocking diode. These are good for reverse polarity protection (put it...
$1.50 each
In Stock
Lithium-ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light, and powerful. The output...
$6.95 each
In Stock
These nice switches are perfect for use with breadboard and perfboard projects. They have 0.1" spacing and snap in...
$0.95 each
In Stock
2mm single strand end glow fiber optic filament
15M Ω Resistor
Through-hole resistor 1/4 watt 5%
82nF Ceramic Capacitor
Filtering capacitor 10V or higher
Steel Threaded Rods
(×2)
M5 x 250mm Fully Threaded
Steel Nuts
(×4)
M5 hex
Nylon Screw
M3 x 8mm socket head
Nylon Spacer Standoff
M3 x 6mm (cut to length)
Page last edited March 08, 2024
Text editor powered by tinymce.
