You're a human! Right? For now anyway... There's a red pulsing in the distance... OH NO! IT'S A ZOMBIE! You're losing health, but what's this? A white pulsing from around a corner, a healer! You'll stay human for a little longer... Hopefully long enough to check out this guide!

Using Circuit Playground Express you can make a game that's half laser-tag half hide-and-seek. 

This game requires at least three players, which means it requires at least three Circuit Playground Expresses. You can play with as many more than three, as many as you want!

It's great for workshops, classrooms, camps or other groups of 3 or more! The more people you have, the more fun the game gets.

This guide will go through the code for the game, explain how it works and how to play. Good luck and have fun!

Parts List

For EACH player, you'll need  a Circuit Playground Express, portable power pack and a way to attach the CPX to the front of a players shirt

A Black woman's manicured hand holds a round microcontroller with lit up LEDs.
Circuit Playground Express is the next step towards a perfect introduction to electronics and programming. We've taken the original Circuit Playground Classic and...
$24.95
In Stock

Portable Power

Angled shot of 3 x AAA battery holder with on-off switch, JST PH connector, and belt clip.
This battery holder connects 3 AAA batteries together in series for powering all kinds of projects. We spec'd these out because the box is slim, and 3 AAA's add up to about...
$2.95
In Stock

OR

Front angled shot of 3 x AAA battery holder with on-off switch and 2-pin JST PH connector.
This battery holder connects 3 AAA batteries together in series for powering all kinds of projects. We spec'd these out because the box is slim, and 3 AAA's add up to about...
$1.95
In Stock

Circuit Playground Attachment

Silver Pin Back with Foam Adhesive
This little Silver-color Pin with Foam Adhesive is the perfect way to attach any PCB or small component to cloth material. The adhesive forms a solid but...
$0.45
In Stock

OR

Magnetic Pin Back
These magnetic pin backs have two pieces: a metal bar with adhesive strip and a plastic piece with two strong rare-earth magnets. Affix the metal bar to your FLORA projects-- it's...
$1.95
In Stock

OR use some safety pins!

This guide was first published on Jul 31, 2018. It was last updated on Mar 18, 2024.

This page (Overview) was last updated on Mar 08, 2024.

Text editor powered by tinymce.