Let's start by actually making the bike glove. This way you can upload programs to it as you work through the rest of the guide.

Use some double sided tape to attach the battery to the back of the Circuit Playground.

Attach the battery to the back of the Circuit Playground as shown.


(battery chargers)

Now get some needle and thread ready for sewing the Circuit Playground to the glove.

Sew the thread through the pad holes. Make several loops and then tie it off in a knot.


Two locations should be enough. I used the SCL #3 and #12 pad holes.


If you want, you can continue to wear the glove as you work through the guide. Just jack in to upload the sketches. You'll look totally cyberpunk!

This guide was first published on Jun 05, 2017. It was last updated on Mar 08, 2024.

This page (Bike Glove Assembly) was last updated on Jun 02, 2017.

Text editor powered by tinymce.