USB 2.0 Powered Hub - 7 Ports with 5V 2A Power Supply
Add lots more USB capability to your Raspberry Pi or computer using this powered USB 2.0 hub. It adds a full seven powered ports, all at USB 2.0 speeds so you can use...
$32.95
In Stock
5V 2A Wall Wart switching power supply
This is an FCC/CE certified and UL listed power supply. Need a lot of 5V power? This switching supply gives a clean regulated 5V output at up to 2000mA. 110 or 240 input, so it works...
$7.95
In Stock
Close-up of a 2.1mm to 1.7mm DC jack adapter - Black.
We're carrying this adapter primarily to allow Chumby Hacker Board users to adapt our nice 5V @ 2A power supply to their CHB. But...
Out of Stock
USB MicroSD Card Reader/Writer
This is the cutest little microSD card reader/writer - but don't be fooled by its adorableness! It's wicked fast and supports up to 64 GB SDXC cards! Simply slide the card into...
$5.95
In Stock
10 foot long Coiled Ethernet Cable.
We have so many Internet-connected goodies in the shop, we figured it's time to carry a cable so you can easily connect them up! This cable is 10 feet long, black and has all 8...
Out of Stock
USB to TTL Serial Cable With Type A plug and 4 wire sockets
The cable is easiest way ever to connect to your microcontroller/Raspberry Pi/WiFi router serial console port. Inside the big USB plug is a USB<->Serial conversion chip and at...
$9.95
In Stock
Coiled FTDI Serial TTL-232 USB Cable.
Just about all electronics use TTL serial for debugging, bootloading, programming, serial output, etc. But it's rare for a computer to have a serial port anymore. This is a USB to...
$19.95
In Stock
Hand removing/installing micro SD card from SD adapter
Add mega-storage in a jiffy using this 8 GB class 4 micro-SD card. It comes with a SD adapter so you can use it with any of our shields or adapters. Preformatted to FAT so it works out...
$9.95
In Stock