Playing retro games is easy on a Raspberry Pi - and the pocket computer is pretty good at it too! All you need is a little help to connect buttons and a joystick up and you can custom design your own arcade console, desktop or stand-up machine, even just a simple controller box. It makes for a fun weekend project that will last all year. This Adafruit Arcade Bonnet is designed to make small emulator projects a little easier to build. Here's what you can look forward to!
The NeoPix Arcade Kit is a 1D arcade game system to encourage young programmers to code. The NeoPix Arcade Kit comes with a preprogrammed Circuit Playground that includes our 1D Pong Game to immediately start exploring basic game programming concepts on the Circuit Playground. The Circuit Playground Board has a host of sensors to create a variety of handheld electronic gaming projects.
Here's a Soviet themed launch-code box, complete with missile switch covered toggles, a Feather with red 14-segment display for the countdown timer, and stress-inducing piezo buzzer. Use it for an escape room, prop, or wedding proposal. Your players, or potential spouse-to-be, will need to enter the correct five-switch sequence to defuse the device before all is lost. (Note: this project is a harmless prop, not an actual bomb.)
Build a creepy, glowing test tube display... if you dare. A Feather microcontroller makes the UV LEDs shine to create dazzling effects in the fluorescent pigment-and-water filled test tubes. Easy-to-assemble black iron pipe forms the base of this labware set. The perfect prop for your own haunted house or creepy laboratory.
Pokemon GO has shown us that people can really go crazy over running around our cities bent on catching imaginary animals. It has also shown us that people are going crazy over chasing down said animals at all hours of the night and not always paying attention to what is going on around them. This is amplified when we are talking about children that are having a blast literally trying to catch them all. Build a safety light that's also a lovely way to show team spirit with this no-solder project!
We're doing a lot of streaming lately, and I wanted to make a sign that would let people know when we're on air. All this guide will do is connect to the Twitch API and determine if the user is currently streaming - if so, the Feather will turn on some NeoPixels (you can also just use LEDs if you like) to light up the sign.
Sandblaster is a variation on Blue Buggy remixing the original Cox International gas-powered sand buggy - scaled-down, converted to electric, and 3D printable! You can use it to explore obstacle avoidance, autonomous navigation, driverless vehicle design, or assisted Remote Control. Or… build in the morning and race in the afternoon!