LCDS & DISPLAYS
54 GUIDES | 406 PAGES | 0 FEATURED | 10 POPULAR
This FeatherWing has so much stuff going on, we could not fit any more parts on the PCB! There's a 0.96" 160x80 Color TFT Display with 16-bit full color capability. And, so you can make a proper UI we added a 5-way navigation switch and two push buttons. The joystick can go left, right, up, down and 'in' for selection. Two buttons on the side can change modes or whatever you like.
Spice up your Feather project with a beautiful 3.5" touchscreen display shield with built in microSD card socket. This TFT display is 3.5" diagonal with a bright 6 white-LED backlight. You get a massive 480x320 pixels with individual 16-bit color pixel control. It has way more resolution than a black and white 128x64 display, and twice as much as our 2.4" TFT FeatherWing. As a bonus, this display comes with a resistive touchscreen attached to it already, so you can detect finger presses anywhere on the screen.
The Snake Eyes Bonnet is a Raspberry Pi accessory for driving two 128x128 pixel OLED or TFT LCD displays, and also provides four analog inputs for sensors. It's perfect for making cosplay masks, props, spooky sculptures for halloween, animatronics, robots...anything where you want to add a pair of animated eyes!
Spice up your Feather project with a beautiful 2.4" touchscreen display shield with built in microSD card socket. This TFT display is 2.4" diagonal with a bright 4 white-LED backlight. You get 240x320 pixels with individual 16-bit color pixel control. It has way more resolution than a black and white 128x64 display. As a bonus, this display comes with a resistive touchscreen attached to it already, so you can detect finger presses anywhere on
This guide starts with the absolute basics to build user interfaces on the PiTFT in Pygame. It shows how to update the screen from a GPI. Then, in reverse, the touch screen is used to control a GPO. Next, a UI framework is introduced - this makes better looking interfaces and more elegant code. Finally, an analog input is used to control a gauge widget on the display.
Add some jazz & pizazz to your project with a color touchscreen LCD. This TFT display is 2.4" diagonal with a bright (4 white-LED) backlight and it's colorful! 240x320 pixels with individual RGB pixel control, this has way more resolution than a black and white 128x64 display. As a bonus, this display has a resistive touchscreen attached to it already, so you can detect finger presses anywhere on the screen.
Is this not the cutest little display for the Raspberry Pi? This HAT features a 2.4" display with 320x240 16-bit color pixels and a resistive touch overlay. The HAT uses the high speed SPI interface on the Pi and can use the mini display as a console, X window port, displaying images or video etc. Best of all it plugs right in on top!
Kali is a security and penetration testing distribution, preloaded with a wide range of network tools and other utilities. If you'd like to use it on a Raspberry Pi with the PiTFT display, there's only one real problem: It uses a custom kernel which doesn't presently include all the stuff you need to use the PiTFT as a touchscreen. We'll go over the basics of an install and remedy the kernel situation.
Adafruit’s PiTFT displays link to the Raspberry Pi’s GPIO header instead of a video port, making them compact & ideal for portable projects. But this connection normally limits them to a subset of specially-compiled games and emulators — high-performance OpenGL-based games were previously incompatible. New software now makes gaming more practical on these tiny displays!