With this Feather we're getting a little nostalgic for the ATmega328P - the classic 'Arduino' chip - with this Adafruit Feather 328P running a 3.3V and 8 MHz. Feather is the new development board from Adafruit, and like it's namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores.
What's smaller than a Feather but larger than a Trinket? It's an Itsy Bitsy! Small, powerful, Arduino-compatible - this microcontroller board is perfect when you want something very compact, but still with a bunch of pins. Itsy Bitsy is only 1.4" long by 0.7" wide, but has 6 power pins, 23 digital pins with plenty of analog in and pwm out. It packs much of the same capability as an Arduino UNO. So it's great once you've finished up a prototype on a bigger Arduino, and want to make the project much smaller.
Peltier cooler + Trinket M0 + CircuitPython = refreshing drinks! This project uses a thermoelectric cooling assembly to turn electricity into coldness!! That chill is transferred to your beverage of choice via thermal conductivity, and then transported safely to your drinking glass with a peristaltic pump. Ahhhh.
An IR distance sensor, Trinket M0, NeoPixel strip, and AudioFX sound board plugged into powered speakers combine to make a booby trapped candy bowl. The CircuitPython program measures the distance of objects in front of the IR sensor, and changes the LED colors to match. Then, when you get too close, it screams bloody murder!!
The Adafruit Trinket M0 may be small, but do not be fooled by its size! It's a tiny microcontroller board, built around the Atmel ATSAMD21, a little chip with a lot of power. We wanted to design a microcontroller board that was small enough to fit into any project, and low cost enough to use without hesitation. Perfect for when you don't want to give up your expensive dev-board and you aren't willing to take apart the project you worked so hard to design. It's our lowest-cost CircuitPython programmable board!
It’s not pleasant thinking about one’s mortality, but that’s the point of this project: to make one aware of the passage of time and how precious each minute is. As you look at the clock, remember that you are never getting those minutes back. Stop watching internet cat videos and make the most of them!
In this Pro Trinket powered project, build and 3D print yourself a friend, an Adafriend! This little colorful guy with an eye responds to taps and vibrations, and shows emotion on its little LED matrix face with a sad, neutral, happy, or angry face. It plays tones that correspond to it's emotional state, and even sings some recognizable tunes and themes when it's in the mood! If left alone for too long it gets lonely, but pester your pet too much and it may get angry at you! Build yourself an Adafriend and keep it happy to sing along with the coolest cube around!
OpenOCD is great because its cross platform, open source, and has support for a vast number of chips & programmers. You can use OpenOCD with dongle-programmers such as J-Link and ST-Link or even an FTDI chip. But, if you have a spare Raspberry Pi (and who doesn't these days?) you can use it as a native OpenOCD programmer with just a few wires.
Persistence of vision (POV) is the illusion of a solid image where there is none — a task for which LEDs and microcontrollers are a natural fit. Poi is a performance art of spinning tethered weights. Some of the most dramatic performances use fire poi! We sought to create something with that level of “wow,” but safer and usable indoors or out. And so these “Genesis” POV-poi were born.