187 GUIDES | 1054 PAGES | 26 FEATURED | 5 POPULAR
This project takes an existing tool — the Hakko FX-901 cordless soldering iron — and adds USB charging and a beefy Lithium Ion battery inside a 3D-printed pack. I keep this little iron around for cosplay electronics emergencies, and adding USB charging means there’s less to pack…it uses the same phone charger and USB cable I’m already carrying.
Sandblaster is a variation on Blue Buggy remixing the original Cox International gas-powered sand buggy - scaled-down, converted to electric, and 3D printable! You can use it to explore obstacle avoidance, autonomous navigation, driverless vehicle design, or assisted Remote Control. Or… build in the morning and race in the afternoon!
Bring some delightful 8-bit flair to your Christmas tree (or any other holiday foliage) with this Super Mario star power-up, the Starduino! 3D print the custom-designed model, made to lovingly nestle a 16 LED NeoPixel ring and Arduino Gemma in its belly. Then, program the GEMMA with a super fancy blinky pattern of goodness and light.
Self balancing scooters (hoverboards) can make an imagine stabilizer camera rig that can be used to capture smooth, low angle shoots. Mounting a small camera to the body of the scooter can be challenging because the center part of the board twists while in operation. With a 3D printed adapter, we can add clamp a camera mount to the middle of the board without obstructing riding or interfering with the position of the camera mount.
Livestream Studio is an incredibly robust streaming software. Regular keyboards and mice work, but for fast action and ease of use, you can't beat a dedicated piece of switching hardware with arcade buttons. Bluetooth and LiPo-battery powered, have access to everything you need to get your show switching with gusto.