CAD Assembly

The breakout is secured to the bottom cover using two M2.5 x 6mm long screws. The top cover snap fits over the base. Cutouts for the USB-C port, screw-block terminals and wires are available in the top cover.

Build Volume

The parts require a 3D printer with a minimum build volume.

• 34mm (X) x 34mm (Y) x 16mm (Z)

Design Source Files

The project assembly was designed in Fusion 360. This can be downloaded in different formats like STEP, STL and more.

Electronic components like Adafruit's boards, displays, connectors and more can be downloaded from the Adafruit CAD parts GitHub Repo.