Hardware
Use two M2.5 x 6mm long steel machine screws to secure the HUSB Breakout to the bottom cover.
Secure HUSB238 Breakout
Place the PCB over the bottom cover and line up the mounting holes.
Insert and fasten the machine screws to secure the breakout.
Installed Breakout
Orient the top cover with the HUSB238 breakout so USB label is aligned with the USB-C port.
Snap Fit
Place the top over the bottom and firmly press them together.
To open, squeeze the sides of the top and pull part.
Page last edited March 08, 2024
Text editor powered by tinymce.
