Install Feather

Orient the Feather and the case with the USB-C connector facing the smaller opening.

Insert Feather at an angle with the USB-C port passing through the USB-C opening in the case.

Installed Feather

Press the Feather into the case so the pegs in the built-in standoffs fit through the four mounting holes.

Align Cover

Orient the top cover with the two buttons and the STEMMA QT port lined up with the components on the Feather.

Install Cover

Place the cover over the top of the case and firmly press the edges together until they snap fit. 

Assembled Case

The case features two tabs that are M3 sized for securing to surfaces. 

USB Ports

The USB-C and USB-A ports are accessible on the front and back of the enclosure.

Bottom Slot

For projects that require additional wires, they can pass-through the slot in the bottom of the case.