3D Printed Case
Make a snap fit case for the Feather RP2040 DVI. 3D print the parts in your favorite filament and secure your Feather without any hardware screws!
Enclosure Features
The top cover features button pressers for both the BOOT and RESET buttons. The STEMMA QT port is accessible so you can plug-n-play I2C sensors with STEMMA QT. There's also a spot for the on-board NeoPixel to shine through.
Wouldn't it be cool if you could display images and graphics from a microcontroller directly to an HDMI monitor or television? We think so! So we designed this RP2040 Feather that...
guides with product
$14.95
In Stock
Connect two HDMI devices together and save space with this slim, high quality HDMI cable. It has nice molded grips for easy installation and is 450mm long (~1.5 feet). Sporting...
$9.95
In Stock
This cable is not only super-fashionable, with a woven pink and purple Blinka-like pattern, it's also made for USB C for our modernized breakout boards, Feathers, and...
Out of Stock
This cable is not only super-fashionable, with a woven pink and purple Blinka-like pattern, it's also made for USB C for our modernized breakout boards, Feathers and more.
$3.95
In Stock
Page last edited March 08, 2024
Text editor powered by tinymce.
