3D Printed Case

Make a snap fit case for the Feather RP2040 DVI. 3D print the parts in your favorite filament and secure your Feather without any hardware screws!

Enclosure Features

The top cover features button pressers for both the BOOT and RESET buttons. The STEMMA QT port is accessible so you can plug-n-play I2C sensors with STEMMA QT. There's also a spot for the on-board NeoPixel to shine through.

Parts

Video of DVI prototyping dev board sending graphic images to an HDMI monitor.
Wouldn't it be cool if you could display images and graphics from a microcontroller directly to an HDMI monitor or television? We think so! So we designed this RP2040 Feather that...
Slim HDMI Cable - 900mm / 3 feet long
Connect two HDMI devices together and save space with this slim, high quality HDMI cable. It has nice molded grips for easy installation and is 1820mm long (~6 feet)....
Slim HDMI Cable - 450mm / 1.5 feet long
Connect two HDMI devices together and save space with this slim, high quality HDMI cable. It has nice molded grips for easy installation and is 450mm long (~1.5 feet). Sporting...
Angled shot of coiled pink and purple USB cable with USB A and USB C connectors.
This cable is not only super-fashionable, with a woven pink and purple Blinka-like pattern, it's also made for USB C for our modernized breakout boards, Feathers, and...
Angled shot of a pink/purple woven USB cable plugged into a laptop port and a small dev board.
This cable is not only super-fashionable, with a woven pink and purple Blinka-like pattern, it's also made for USB C for our modernized breakout boards, Feathers and more. 

This guide was first published on Jun 28, 2023. It was last updated on Mar 08, 2024.

This page (Overview) was last updated on Mar 08, 2024.

Text editor powered by tinymce.