Overview

You can build your own set of Garnet's Gauntlets and power up for battle! Punch with your Circuit Playground Express enabled fist to get a light and sound reaction!

With MakeCode, you can program the Circuit Playground Express to do exactly what you want using the drag-and-drop, block-based interface right inside your web browser.

Circuit Playground Express

PRODUCT ID: 3333
Circuit Playground Express is the next step towards a perfect introduction to electronics and programming. We've taken the original Circuit Playground Classic and...

Adafruit Circuit Playground Express Enclosure

PRODUCT ID: 3915
We've got nice cases for many of our beloved boards, but the Circuit Playground Express has been left out of couture enclosure...

3 x AAA Battery Holder with On/Off Switch, JST, and Belt Clip

PRODUCT ID: 3286
This battery holder connects 3 AAA batteries together in series for powering all kinds of projects. We spec'd these out because the box is slim, and 3 AAA's add up to about...

Alkaline AAA batteries - 3 pack

PRODUCT ID: 3520
Battery power for your portable project! These batteries are good quality at a good price, and work fantastic with any of the kits or projects in the shop that use AAA's. This is a...

USB cable - USB A to Micro-B

PRODUCT ID: 592
This here is your standard A to micro-B USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your Metro, Feather, Raspberry Pi or other dev-board or...

Plastic Pop Rivets for Cardboard Crafts (20-pack)

PRODUCT ID: 3822
Enter the world of cardboard construction and build playful robot friends! Instead of slapping on tape or waiting for your hot glue to warm up, you can use these...

Materials & Tools

In addition to the parts above, you'll also need:

  • Sheets of colored craft foam
  • Tacky glue
  • Hot melt glue and hot glue gun
  • Scissors or a hobby knife
  • Ruler
  • Cutting mat
This guide was first published on Feb 01, 2019. It was last updated on Feb 01, 2019. This page (Overview) was last updated on Aug 19, 2019.