The parts in this kit are designed to be 3D printed with FDM based machines. STL files are oriented to print "as is". Parts require tight tolerances that might need adjustment of slice settings. Reference the suggested settings below.

CAD Files

The parts can further be separated into small pieces for fitting on printers with smaller build volumes. Note: a STEP file is included for other 3D surface modeling programs such as Onshape, Solidworks and Rhino.

Share, Make, Remix

These parts have been modified to fit all of the electronics and available to download!

Settings

Use these settings as reference. Values listed were used in Cura slicing software.

0.2mm Layer Height / 0.4mm nozzle
0.38mm Line Width (inner & outer widths)
60mm/s printing speed
10% infill
Supports: No
Brim: 7mm

This guide was first published on Oct 01, 2019. It was last updated on Oct 01, 2019.

This page (3D Printing) was last updated on Oct 04, 2021.

Text editor powered by tinymce.