This weeks project is making Cappy from Mario Odyssey.
The Adafruit Monster M4sk has everything we need to make this project.
With the Monster M4sk, you can customize the eyes to match the theme of your character.
It's really easy to edit the configuration file and make it look how you want! Just open a file in a text editor. You can change things like the size and color of the iris.
The PCB is designed so that you can break the two eyes apart and bring them closer together.
The Monster M4sk features a splittable design! This allows you to cut along the perforations on the PBC to separate the two eyes. the Two boards are then connected via a JST SH 9-Pin cable.
We can even create a longer wire to increase the distance even further like we did with the longer antenna eyes!
Adafruit Monster M4sk
The Adafruit Monster M4sk packs a ton of awesome stuff into one single board. It’s running a Cortex M4, it has 8 megabytes of flash storage, USB charging and 2x IPS TFT LCD displays. It also has buttons, light sensor, expansion ports and accelerometer.
Be sure to check out the quick start guide for the full run down on code and graphics setup.
PRODUCT ID: 4343
Peep dis! Have you always wanted to have another pair of eyes on the back of your head? Or outfit your costume with big beautiful orbs? The MONSTER M4SK
PRODUCT ID: 4236
Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery...
PRODUCT ID: 4111
This cable is not only super-fashionable, with a woven pink and purple Blinka-like pattern, it's also fully reversible! That's right, you will save seconds a day by...
PRODUCT ID: 4350
This 9-pin cable is just about 100mm / 4" long and fitted with JST-SH female connectors on both ends. Compared with chunkier JST-PH these are 1mm pitch instead of 2mm,...
PRODUCT ID: 4306
Cut through materials like a boss with the elegant Slice Craft Knife, a safer cutter with a ceramic blade. This ergonomic...