Create not-so-subtle candy preference GIF eyes for your trick-or-treat bucket! This is a public service that will assist others in providing you with only the good candy, and none of the bad candy this Halloween!

The MONSTER M4SK can play back your animated GIFs, stored right on the board's QSPI -- use the built-in buttons to switch between them, or let them automatically cycle.


MONSTER M4SK DIY Electronic Face mask.  Two Screens Display Eyes that blink and dart up and down.
Peep dis! Have you always wanted to have another pair of eyes on the back of your head? Or outfit your costume with big beautiful orbs? The MONSTER M4SK
Out of Stock
Lithium Ion Polymer Battery 3.7v 420mAh with JST 2-PH connector and short cable
Lithium-ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light, and powerful. The output ranges from 4.2V when completely charged to 3.7V. This...
In Stock
Fully Reversible Pink/Purple USB A to micro B Cable
This cable is not only super-fashionable, with a woven pink and purple Blinka-like pattern, it's also fully reversible! That's right, you will save seconds a day by...
In Stock
Black Nylon Screw and Stand-off Set with M2.5 Threads, kit box
Totaling 380 pieces, this M2.5 Screw Set is a must-have for your workstation. You'll have enough screws, nuts, and hex standoffs to fuel your maker...
In Stock

In addition to these parts, you'll also need:

  • a classic, plastic candy bucket
  • marker
  • awl or thin screwdriver
  • hobby knife
  • double-stick foam tape or velcro for battery attachement

This guide was first published on Sep 18, 2019. It was last updated on Mar 08, 2024.

This page (Overview) was last updated on Mar 08, 2024.

Text editor powered by tinymce.