Overview

Create not-so-subtle candy preference GIF eyes for your trick-or-treat bucket! This is a public service that will assist others in providing you with only the good candy, and none of the bad candy this Halloween!

The MONSTER M4SK can play back your animated GIFs, stored right on the board's QSPI -- use the built-in buttons to switch between them, or let them automatically cycle.

Parts

Adafruit MONSTER M4SK - DIY Electronic Eyes Mask

PRODUCT ID: 4343
Peep dis! Have you always wanted to have another pair of eyes on the back of your head? Or outfit your costume with big beautiful orbs? The MONSTER M4SK
$44.95
IN STOCK

Lithium Ion Polymer Battery with Short Cable - 3.7V 420mAh

PRODUCT ID: 4236
Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery...
$6.95
IN STOCK

Fully Reversible Pink/Purple USB A to micro B Cable - 1m long

PRODUCT ID: 4111
This cable is not only super-fashionable, with a woven pink and purple Blinka-like pattern, it's also fully reversible! That's right, you will save seconds a day by...
$3.95
IN STOCK

Black Nylon Screw and Stand-off Set – M2.5 Thread

PRODUCT ID: 3299
Totaling 380 pieces, this M2.5 Screw Set is a must-have for your workstation. You'll have enough screws, nuts, and hex standoffs to fuel your maker...
$16.95
IN STOCK

In addition to these parts, you'll also need:

  • a classic, plastic candy bucket
  • marker
  • awl or thin screwdriver
  • hobby knife
  • double-stick foam tape or velcro for battery attachement
This guide was first published on Sep 18, 2019. It was last updated on Sep 18, 2019. This page (Overview) was last updated on Nov 17, 2019.