The 5x5 NeoPixel Grid BFF is designed to be soldered directly to the QT Py ESP32-S3. No wires needed! All you need is two strips of header pins to make a tiny board sandwich.
The BFF is designed to be soldered back-to-back with the QT Py.
The BFF must be oriented in the proper direction to work. The end of the BFF with all of the pads and jumpers is the side that should be closest to the USB connector on the QT Py. There are instructions on the back of the BFF that indicate the proper orientation. Follow them to be sure!
That's all there is to it! You're ready to start coding your nightlight!
Pins to Pins
Even though there's no wiring needed, you may wonder what pins are being used by the BFF and how they coincide with the QT Py pins.
Text editor powered by tinymce.
