Featured Products
Adafruit Trinket M0 - for use with CircuitPython & Arduino IDE
PRODUCT ID: 3500
The Adafruit Trinket M0 may be small, but do not be fooled by its size! It's a tiny microcontroller board, built around the Atmel ATSAMD21, a little chip with a lot...
$8.95
IN STOCK
Adafruit Trinket - Mini Microcontroller - 5V Logic
PRODUCT ID: 1501
As of October 9th, 2015 the 5V Trinket comes with a micro-USB connector instead of a mini-USB connector!Trinket may be small, but do not be fooled by its size!...
$6.95
IN STOCK
Adafruit Mini Skinny NeoPixel Digital RGB LED Strip - 60 LED/m
PRODUCT ID: 2959
So thin. So mini. So teeeeeeny-tiny. It's the 'skinny' version of our classic NeoPixel strips!These...
$99.80
IN STOCK
Lithium Ion Cylindrical Battery - 3.7v 2200mAh
PRODUCT ID: 1781
Need a big battery for your project? This lithium ion battery contains a 2200mAh and a protection circuit that provides over-voltage, under-voltage and over-current protection. Yet, it...
$9.95
IN STOCK
Silicone Cover Stranded-Core Wire - 50ft 30AWG Red
PRODUCT ID: 3165
Silicone-sheathing wire is super-flexible and soft, and its also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire...
$4.95
IN STOCK
Adafruit LiIon/LiPoly Backpack Add-On for Pro Trinket/ItsyBitsy
PRODUCT ID: 2124
If you have an ItsyBitsy or Pro Trinket you probably know it's the perfect little size for a portable project. This LiPoly backpack makes it really easy to do! Instead of wiring 2...
$4.95
IN STOCK
Blue Masking Tape for 3D Printing Plates
PRODUCT ID: 2416
OK yes, it's just masking tape. A big honkin' roll of I'm blue da-ba-dee-da-ba-die masking tape.Removing 3D printed parts can be tough. Sometimes pieces get stuck to...
$49.95
IN STOCK
PLA Filament for 3D Printers - 1.75mm Diameter - Black - 1KG
PRODUCT ID: 2060
Having a 3D printer without filament is sort of like having a regular printer without paper or ink. And while a lot of printers come with some filament there's a good chance...
$39.95
IN STOCK
PLA Filament for 3D Printers - 1.75mm Natural Translucent - 1KG
PRODUCT ID: 2451
Having a 3D printer without filament is sort of like having a regular printer without paper or ink. And while a lot of printers come with some filament there's a good chance...
$39.95
IN STOCK