There's nothing wrong with DIY jumpers, and for the neatest looking breadboards, you'll want to use them.

That said, sometimes you just want to be wiring ASAP. That's where pre-made jumper wires are really great. They're a little more expensive but you dont need wire strippers and they have these lovely grips.

We have these in a wide variety of lengths and configurations Usually, we like to start our breadboard wiring with these and then 'clean up' with hand-cut ones once we know the wiring is correct and the lengths won't change

Angled shot of Premium Male/Male Jumper Wires - 40 x 3 (75mm)
Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 3" (75mm) long and come in a 'strip' of 40 (4 pieces of each of...
$3.95
In Stock
Angled shot of Premium Male/Male Jumper Wires - 40 x 6 (150mm)
Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 6" (150mm) long and come in a 'strip' of 40 (4 pieces of each of...
$3.95
In Stock
Premium Male/Male Jumper Wires - 40 x 12 (300mm) folded over
Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 12" (300mm) long and come in a 'strip' of 40 (4 pieces of each of...
$7.95
In Stock

This guide was first published on Sep 06, 2016. It was last updated on Mar 08, 2024.

This page (Pre-made Jumper Wires) was last updated on Sep 06, 2016.

Text editor powered by tinymce.