3D Printed Case

If you're just getting started with BrainCraft projects, chances are you need a way of keeping parts held together. This is where a 3D printed enclosure comes in handy. This case is designed to house the Raspberry Pi 4, BrainCraft HAT and a Pi camera module. It features a mounting plate for mounting to camera tripods.

Pi Cameras

The enclosure supports both the Camera V2 and HQ modules. The PCB mount features mounting holes that make it easy to secure the camera.

Prerequisite Guides

Take a moment to walk through the following guides to get familiar with the boards and components.

Parts

Video of a white hand hovering a coffe mug over a Adafruit BrainCraft HAT thats connected to a Raspberry Pi 4. Display detects that its a coffee mug.
The idea behind the BrainCraft HAT is that you’d be able to “craft brains” for Machine Learning on the EDGE, with Microcontrollers & Microcomputers. On ASK...
$44.95
In Stock
Angled shot of Raspberry Pi 4
NOTE: Due to stock limitations we may only be able to offer refunds or store credit for Pis that are defective, damaged or lost in...
Out of Stock
Angled shot of Raspberry Pi Camera Board v2 - 8 Megapixels connected to a flex cable and a Raspberry Pi.
Snap, snap! The Camera v2 is the new official camera board released by the Raspberry Pi Foundation!The Raspberry Pi Camera Board v2 is a high quality 8...
Out of Stock
Top view of Raspberry Pi HQ camera module.
Snap, snap! There's a new official camera board released by the Raspberry Pi Foundation!The Raspberry Pi High Quality Camera is the latest camera accessory...
$50.00
In Stock
1 x M2.5 Hardware
Black Nylon Screw and Stand-off Set – M2.5 Thread
1 x Mini Tripod Stand
Portable Folding Desktop Stand
1 x Mini Ball Head for Tripod
Tripod Mini Ball Head Tripod Mount Head-Metal

This guide was first published on Nov 11, 2020. It was last updated on Nov 11, 2020.

This page (Overview) was last updated on Jun 02, 2022.

Text editor powered by tinymce.