Check your kit!
Check to make sure your kit comes with the following parts.Sometimes we make mistakes so double check everything and email [email protected] if you need replacements!Parts list
| Image | Name | Description | Part information | Qty |
|
IC1 | Microcontroller (preprogrammed when purchased in a kit) |
ATTINY25V-10-PU (unprogrammed when not purchased from Adafruit) |
1 |
|
|
IC1' | 8-pin socket | Generic | 1 |
|
X1 | Stereo headphone jack | STX-3100-5N | 1 |
|
R-LED, L-LED | 5mm Diffused Red LED | Generic | 2 |
|
R3, R4 | 1/4W 5% 47 ohm resistor | Generic | 2 |
|
|
R1, R2 |
1/4W 5% 2.2K resistor
Red, Red, Red, Gold |
Generic | 2 |
|
C1, C2 | 1.0 uF electrolytic capacitor
6V or greater voltage rating |
Generic | 2 |
|
|
ON/OFF | 6mm tactile switch | B3F-1000 | 1 |
|
|
ICSP | 6-pin ICSP header
For advanced users who want to reprogram the microcontroller. Don't solder in until then! |
Generic | 1 |
|
BATT | 2 x AAA battery holder | 1 | |
|
PCB | Circuit board | Adafruit Industries | 1 |
|
Over-ear Headphones | 1 | ||
|
Safety Glasses | 1 | ||
|
Rainbow Ribbon Wire
The rainbow type makes it easier to keep track of wires. |
1 ft | ||
|
4" Zip/wire ties These are bonus parts, in case you need them for securing the electronics to the glasses. |
2 | ||
| Heat shrink tubing 1/16" diameter | 4" | |||
|
Paper Overlay | 1 | ||
|
AAA batteries | 2 |
Page last edited March 06, 2013
Text editor powered by tinymce.
