Secure PCBs to Mounting Plate

The Raspberry Pi assembly and PowerBoost are secured to the mounting plate using various M2.5 machine screws. Follow the photo for the correct orientation of the boards.

Mounting Pi

The Pi assembly requires 2x short M2.5 x 5mm screws in the front and longer M2.5 x 8mm screws on the back – Because of the PICO hat. 2x M2.5 washers can secure the longer screws.

Mount PowerBoost

Place the PowerBoost board over the four standoffs and hold it in place. Use 4x short M2.5 x 5mm screws to secure the PowerBoost to the four standoffs. Insert the screws and hold the board in place while fastening until fully tightened.

This guide was first published on Nov 08, 2017. It was last updated on Mar 08, 2024.

This page (Mounting Plate) was last updated on Nov 06, 2017.

Text editor powered by tinymce.