Overview

Hugely popular in the 1980s, the Boglin was creepy enough to spook anyone who laid eyes upon one.

After some invasive but brief surgery, you can make this forgotten swamp creature even more spooky by giving it some eerie eyes with the MONSTER M4SK.

See, the M4SK and Boglin were meant to be, the board fits perfectly inside of the Boglin with minimal adjustment!

Parts

AdaBox013 - THE MONSTER M4SK

PRODUCT ID: 4281
I was hacking in the lab quite late one night - soldering pins and debugging the bytesWhen suddenly a bang exploded with sparks, and a figure emerged from the hazy dark!
$79.95
IN STOCK

Adafruit MONSTER M4SK - DIY Electronic Eyes Mask

PRODUCT ID: 4343
Peep dis! Have you always wanted to have another pair of eyes on the back of your head? Or outfit your costume with big beautiful orbs? The MONSTER M4SK
$44.95
IN STOCK

Lithium Ion Polymer Battery - 3.7v 500mAh

PRODUCT ID: 1578
Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery...
$7.95
IN STOCK

DIY USB Cable Parts - Right Angle Micro B Plug Down

PRODUCT ID: 4105
If you love DIY cable-rigging, then these USB adapters are right up your alley! Making custom USB cables has never been easier. Just grab one of our 
$4.95
IN STOCK

DIY USB or HDMI Cable Parts - 20 cm Ribbon Cable

PRODUCT ID: 3561
If you're looking to make a custom cable with any two of our USB or HDMI adapters, then you'll need to have these flex cables handy! Making custom cables has never been...
$1.95
IN STOCK

DIY USB Cable Parts - Straight Micro B Jack

PRODUCT ID: 4107
If you love DIY cable-rigging, then these USB adapters are right up your alley! Making custom USB cables has never been easier. Just grab one of our
$4.95
IN STOCK

Materials and Supplies

  • Boglin (Unfortunately they are no longer made but can find some on Ebay and other sites)
  • Hobby knife
  •  Super glue (Bob Smith Industries Maxi-Cure Extra Thick works great)
  • Isopropyl alcohol for surface cleanup/prep
  • Marker
  • 8 x 2mm width zip ties

Optional

  • Velcro hook and loop fastener with adhesive backing (optional - for securing battery)
  • Panavise(s) for glue drying, not 100% necessary but helps make sure components are glued together securely

Panavise Jr.

PRODUCT ID: 151
The best mini-vise for working on smaller PCBs (2.875" or less in one dimension)! The jaws are strong plastic that wont damage the PCB and doesn't mind if you hit it with the...
$30.00
IN STOCK

Panavise Multi-Purpose Work Center

PRODUCT ID: 2452
The Panavise Multi-Purpose Work Center is a versatile combination designed for holding larger, heavier objects. Very stable. An exceptional choice for any...
$109.95
IN STOCK
This guide was first published on Oct 02, 2019. It was last updated on Oct 02, 2019. This page (Overview) was last updated on Nov 19, 2019.