0

RELATED GUIDES

Set up and Blink - MATLAB and Simulink with Arduino
How to use MATLAB and Simulink to communicate with your Arduino
by Anuja Apte
Step-by-step instructions on how to set up and use MATLAB and Simulink Support Packages to program your Arduino Due to blink an LED.
Analog Feedback Servos
What position is your servo in?
by Bill Earl
The very word "servo" implies feedback-based control. But for most RC servos, that feedback signal is not available outside the servo case. So when controlling them from a microcontroller, you never really know if the servo is doing what you tell it to do. These feedback servos have an extra wire for the feedback signal. This lets you monitor the servo motion to verify that it is working as expected. It also lets you use the servo as an input device.
Circuit Playground: D is for Diode
Learn about the electronic one-way valve!
by C. Cunningham
Join Adabot & Woz as they explore how a diode controls the flow of electrons and how it's used in a circuit.
UPDATED
Bluefruit LE Connect for iOS
Learn how to use your iOS device to control and communicate with Bluefruit LE.
by C. Cunningham
Use Bluefruit LE Connect with Bluefruit LE hardware to control your project with your phone's accelerometer, send data over UART console, control Arduino pins, and much more.