3D Printing

These parts will fit on 3D printers with a minimum bed of 100mm x 100mm. The parts can be printed without any support material. They're oriented in the center and positioned to print "as-is".

You can download the files for this project by clicking the button below. 

enclosure-top.stl

1x cover to the enclosure box

enclosure-box.stl

1x enclosure for Uno and Adafruit Motor Shield V2

rail-foot.stl

2x feet for supported slide rail

camera-mount.stl

1x camera to slide railing platform adapter

bearing-mount.stl

1x mount for radial ball bearing

motor-mount.stl

1x mount for NEMA-17 size stepper motor

This guide was first published on Oct 01, 2015. It was last updated on Oct 01, 2015. This page (3D Printing) was last updated on Apr 18, 2019.