0

Overview

Author Gravatar Image SIMON MONK
In this tutorial, you will learn how to control an external LED using a BeagleBone Black (BBB) from Python.
beaglebone_overview.jpg
Because the BBB runs Linux, there are many ways in which it can be programmed. In this tutorial we show how to control an output pin and hence LED using Python.
YOU WILL NEED
Last updated on 2015-03-05 at 02.30.11 AM Published on 2013-06-17 at 02.17.30 PM

RELATED GUIDES

Pro Trinket Rotary Encoder
Use Pro Trinket as a combination keyboard and mouse device
Pro Trinket can function as both a USB HID keyboard and mouse at the same time with the introduced Arduino library. This project demonstrates using a rotary encoder as a multimedia volume control and mute switch for your computer.
Author Gravatar Image MIKE BARELA
Adafruit CC3000 WiFi and Xively
Connect sensors to Xively with Arduino & the CC3000 WiFi chip!
In this guide you will learn how to connect your sensors to the Internet of Things platform Xively using Arduino & the Adafruit CC3000 WiFi breakout board. With Xively, you can then monitor the status of your sensors from anywhere using the Xively web interface.
Author Gravatar Image M. SCHWARTZ
Adafruit's Raspberry Pi Lesson 9. Controlling a DC Motor
Drive a DC motor forward and in reverse with variable speed
This lesson describes how to control both the speed and direction of a DC motor using Python and a L293D chip.
Author Gravatar Image SIMON MONK
Arduino Lesson 6. Digital Inputs
Learn Arduino, Lesson 6. Digital Inputs
This is Lesson 5 in the Learn Arduino Adafruit series. In this lesson, you will learn to use push buttons with digital inputs to turn an LED on and off.
Author Gravatar Image SIMON MONK