Speaker Extension Cable

The stock cable on the mini oval speaker is too short to reach the circuit once inside the hilt. Use a piece of 2-wire silicone cable to make the speaker cable longer.

  • 2-Wire Silicone Cable - 8cm long

Solder 2-pin Cable

Cut the the speaker cable in half and use wire stripper to remove a bit of insulation from each wire. Tin the strands of wire by adding a bit of solder. Use helping third hands to keep the wires sturdy while soldering. Use pieces of heat shrink tubing to insulate any exposed connections. Repeat this process for the other send of the cable.

Wired Speaker

Double check the wires are properly soldered.

This guide was first published on Jan 19, 2021. It was last updated on Jun 19, 2024.

This page (Wiring Speaker) was last updated on Mar 08, 2024.

Text editor powered by tinymce.