Bluetooth Control

This project uses the Adafruit Bluefruit LE connect app (available free for Android and iOS) to trigger the lights and sounds. It uses the control pad to trigger up to 8 different colors and sound effects. If you haven't downloaded the app yet, use the button below to install it on your mobile device.

Using Bluefruit LE Connect App

Turn on the Feather by either connecting it via USB to your computer or with the RGB LED button.

Open the Bluefruit LE Connect app and locate the device named CIRCUITPY and tap the connect button. Locate and tap on Controller. Under module, tab on Color Picker

Color Picker

You can change the color of the NeoPixel LEDs by using the Color Picker. Tap connect, select Controller. Under module, tap on Color Picker. Use the color wheel to select a color and the slider to adjust the brightness. Tap the send color button to trigger the color.

Apple Watch

If you have an Apple Watch, you can use the Bluefruit LE Connect App just like the mobile app. The Apple Watch app is included with the iOS app download.

This guide was first published on Jan 19, 2021. It was last updated on Jan 19, 2021.

This page (Usage) was last updated on Apr 20, 2021.

Text editor powered by tinymce.