Turn it on

  • Press the power button until it clicks in the on position.
  • The led in the power button will blink three times, then start to 'breathe'.

Enter the passcode

  • Type in the passcode you programmed on the keypad. 
  • If you enter it successfully, the fingerprint sensor will light up.

Scan your fingerprint

  • Place your finger on the glass window of the sensor.  
  • If the sensor recognizes a finger that you enrolled, you will hear the solenoid click and the led will start flashing rapidly.  
  • You will have 3 seconds to open the box.

This guide was first published on Dec 29, 2012. It was last updated on Dec 29, 2012.

This page (Use It!) was last updated on Dec 29, 2012.

Text editor powered by tinymce.