Spool of NinjaFlex Filament for 3D Printers - snow white color with 1.75mm Diameter.
Featured
Discontinued - you can grab NinjaFlex - 1.75mm Diameter - Almond-Peach Smoothie - 0.50Kg instead! Looking beyond ABS? Tired of PLA? Open a world of possibilities, limited only by your imagination. NinjaFlex, a...
No Longer Stocked
Adafruit NeoPixel Digital RGB LED Strip reel wired to a microcontroller, with all the LEDs in a rainbow
Featured
You thought it couldn't get better than our world-famous 32-LED-per-meter Digital LED strip but we will prove you wrong! You wanted twice the LEDs? We got it (well, its 1.875 times as many but that's within a margin of...
Out of Stock
Purple poslished fingers holding a Adafruit GEMMA v2 - Miniature wearable electronic platform.
Featured
Deprecation Warning: The Gemma bit-bang USB technique it uses doesn't work as well as it did in 2014, many modern computers won't work well. So while we still carry the Gemma so that people can maintain some older projects, we no longer recommend it.
No Longer Stocked
Angled shot of a USB Battery Pack for Raspberry Pi - 5000mAh - 5V @ 2.1A.
Featured
Discontinued - You can grab USB Battery Pack for Raspberry Pi - 10000mAh - 2 x 5V outputs instead!  A medium-sized rechargeable battery pack for your Raspberry...
No Longer Stocked
Front angled shot of 3 x AAA battery holder with on-off switch and 2-pin JST PH connector.
Featured
This battery holder connects 3 AAA batteries together in series for powering all kinds of projects. We spec'd these out because the box is slim, and 3 AAA's add up to about 3.3-4.5V, a very similar range to Lithium Ion/polymer (Li-Ion) batteries and have an on-off switch. That makes...
$1.95 each
In Stock
USB cable with Type A and Mini B ends
Featured
This here is your standard A-miniB USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your Teensy v2, USB Lipo charger w/Mini B connector, among other things.Approximately 3 feet / 1 meter longColor may vary!
No Longer Stocked
Front shot of JST-PH Battery Extension Cable.
Featured
By popular demand, we now have a handy extension cord for all of our JST PH-terminated battery packs (such as our LiIon/LiPoly and 3xAAA holders). One end has a JST-PH compatible socket, and the other end has a matching plug. Between the two, 500mm of color coded wire. Handy for wearable...
$1.95 each
In Stock