The Temboo service has moved away from Arduino support. The service access in this older guide will no longer work.

Now that you're all set up, log in to Temboo and go to the FedEx > TrackingAndVisibility > TrackByNumber Choreo in the Temboo Library. Turn on IoT Mode and select Arduino and Arduino WiFi from the dropdown menus. In the pop-up that appears, give a name to your board (so that you can find it again for future projects), and also fill in your wireless network information (this will enable Temboo to generate code that is preconfigured to work with your network).

Fill out the Input fields using your FedEx keys; your inputs should look similar to those shown in the screenshot below. Make sure to enter the value “test” for the Endpoint input (we’ll change this once we’re finished testing). For the tracking number, put in 123456789012. This is a test tracking number provided by FedEx, which we’ll use for now.

Once you've filled out all of the Input fields, test the Choreo from your browser by clicking Run at the bottom of the window. Now, if you scroll down to the box labeled Response under Output, you’ll see an XML response from FedEx indicating that you were successful.

This guide was first published on Feb 24, 2016. It was last updated on Mar 08, 2024.

This page (Generate Your Sketch) was last updated on Mar 08, 2024.

Text editor powered by tinymce.